|
40 Watts, 87% Efficient, No Heat, All On A 2½” Board! - The EXTREME big brother of the UAM2 in stereo!
- 2 independent 20W amplifiers in one SMT package!
- Super efficient Class D spread spectrum design!
- Built-in click and pop suppression!
- Balanced & unbalanced hi-Z inputs!
- Logic level mute and shutdown functions!
- Selectable gain from +22dB to +36dB!
- Built-in thermal protection!
- Programmable device shutdown with LED indicator!
- Runs cool, no heat sink required!
- All this on a 2½” square board!
The PCGU1000 is the latest and greatest in function generators! Imagine a digital function generator that harnesses the power of your PC to bring you a great combination of affordability and versatility... well it’s here! It’s got everything you need in a function generator and more. Low sine wave distortion, TTL-level synchronization output, automated wave sequence generation via file or RS232 input, and lots more! All these great features are packed into a space-saving and stylish design that won’t clutter up your desk and is a great companion to the PCSU1000 USB scope. Not only does the PCGU1000 include preset standard waveforms for sine, square and triangle waves, but it also comes with a powerful custom signal wave editor to create your own waveforms! The possibilities are endless! How does it work? The signal waves are created in your PC and then produced by the function generator via DDS (Direct Digital wave Synthesis)! Combine this with crystal-based stability and you get rock solid results every time! The included software gives you plenty of options, and lets you create extended bode plots with the use of one of Velleman’s PC scope series (like the PCSU1000). For even greater control, the windows DLL is included to give you all the freedom you need to build your own custom software. The PCGU1000 features 2 equal outputs and a TTL sync output, and will deliver output voltage of 1mVtt up to 10Vtt at 600 ohms. All the outputs are galvanically separated from the PC in order to avoid measuring problems. Power supply included. From Velleman Instruments. System Requirements: - IBM compatible PC
- Windows 98SE, ME, 2000, XP or Vista
- SVGA display card (min. 800 x 600)
- Mouse
- Free USB port
- CD-ROM Drive
| Specifications | | Frequency Range | from 0.01Hz to 2MHz | | Standard Waveforms | Sine, square, triangle | | Predefined Library Wavforms Included | Noise, sweep, and more | | Sweep Freq. Range | 0.0001Hz to 25MHz | | Sweep Time | 1ms to 10 hours | | Noise Mode Bandwidth | 25MHz | | Amplitude Range | 100mVpp to 10Vpp @ 1KHz / 600 ohm load / 0V offset | | Freq. Setting Resolution | 0.01% | | Amplitude Resolution | 0.4% of full scale | | Offset | from 0 to -5V or +5V max. (resolution 0.4% of full scale) | | Vertical resolution | 8 bits (0.4% of full scale) | | Sample rate | 50MHz | | Typical sine wave distortion (THD) | < 0.08% | | Output impedance | 2 x 50ohm | | Power supply | standard 9V DC adapter, 600mA (included) | | Dimensions | 55 x 190 x 200 mm |
 
|
