|
Program Two Functions! - Two channel relay output!
- 'Learn mode' settings are stored in EEPROM
- Toggle or pulse selection for each channel
Use the sleek K8049 as the main remote for your IR control. Perhaps add an automatic light dimmer with the K6712 above. But with 15 channels available on your remote you've got lots of control room to spare! This tiny little receiver gives you two separate channel functions, providing relay closures for each! Each control function can be set for either toggle or pulse mode to fit your specific application. Plus, all settings are stored forever in the built-in EEPROM! Channel and acknowledgement of reception are indicated on the attached LEDs. Relay outputs are rated at 24VAC/VDC at 1A. Runs on 12VDC at 0.75mA and measures a small 1.7" x 1.9" x .6". From Velleman.
|
